Filters and Cartridges

Home / Products / Filters and Cartridges

Your Professional Filters And Cartridges Supplier

Andysuccess (Xiamen) Industry and Trade Co., Ltd., established in 2010, specializes in the research, development, and production of personal protective equipment including gas masks and FFP2 masks. We welcome inquiries and negotiations from both domestic and international clients via phone or in person.

Professional Team

Our company boasts a highly skilled team with extensive technical expertise and managerial experience.

Customized Service

We offer tailored solutions to meet specific customer requirements and provide timely support as needed.

Competitive Pricing

Benefiting from an efficient management system and superior product quality, we are able to maintain competitive and reasonable pricing.

Advanced Production Equipment

We are equipped with state-of-the-art manufacturing facilities to ensure high-quality production.

First 12 3 4 Last 1/4

Specifications of Filters And Cartridges

Cartridges Standard	EN14387: 2004+A1:2008
Class	A1
Protection Type	Organic Vapor
Material	Carbon
Connection Type	Bayonet

Types of Filters And Cartridges

The filters and cartridges produced by our company mainly include the following types:

Half Face Mask Filters

Half Face Mask Filters are essential components for enhancing the protective capabilities of half face respirators. Designed to work seamlessly with most half facepiece respirators, these filters provide reliable protection against a wide range of airborne contaminants, including dust, fumes, vapors, and other harmful particles.

Cartridge With Filter Box

This cartridge with filter is a replaceable filter. Its bayonet compatibility allows it to be used with a half-mask design. It is very effective against certain oil or non-oil-based particles. It can eliminate the odor of organic vapors and has a 99.95% filter. efficient.

ABEK Filter

This ABEK filter is designed to provide protection against organic and inorganic vapors, acid gases, ammonia and its derivatives. At the same time, it is a replaceable filter that can be used together with a repeatable half-mask respirator.

Organic Vapors Respirator

Protect against certain Organic Vapor and Longer respiratory protection.
Replaceable particle filter.
Swept-back design allows an enhanced field of view and comfort.

Features of Filters And Cartridges

Protect against certain Acid Gas and Longer respiratory protection

Replaceable particle filter

Swept-back design allows an enhanced field of view and comfort

Bayonet compatibility allows use with many half facepiece designs

Wide range of applications

Comply with EN14387:2004+A1:2008 & EN143:2000+A1:2006

Functions of Filters And Cartridges

Airborne Contaminant Filtration

Filters out harmful particles, dust, and aerosols from the air, protecting the wearer’s respiratory system.

Chemical Vapor Protection

Provides protection against specific chemical vapors and gases, depending on the type of filter used (e.g., organic vapor, acid gas).

Biological Hazard Protection

Filters can protect against biological agents, such as bacteria and viruses, especially in healthcare settings.

Odor Neutralization

Some filters are designed to adsorb and neutralize unpleasant odors, improving comfort in environments with strong scents.

Enhanced Breathing Comfort

Designed to allow for easier airflow, reducing breathing resistance while ensuring effective filtration.

Essential Steps to Replace Filters And Cartridges

Remove the old cartridge & filters safely
Refer to the instructions for your specific respirator model to find and release the cartridge & filter retainers. This usually involves removing the cartridge & filter housing or turning the filter counterclockwise by a quarter turn. Above all, do not apply full force while detaching old cartridges and filters to prevent damage to the respirator.

Inspect the respirator for any damage
Once the old cartridge & filters have been properly discarded, users should thoroughly examine the respirator for any signs of damage or wear. Inspect the seals and straps, and resolve any issues before installing a new cartridge and filter. You might also conduct the assessment while cleaning the respirator. Wipe the entire facepiece for a clearer view of the sealing surface. Using a damp cloth or wipes can help eliminate dirt or debris that might affect the seal. An important reminder: ensure that the respirator is dry before proceeding to attach the new cartridge and filter.

Attach the new cartridge & filters
Position the new cartridge & filter according to the designated markings on the respirator. Different respirator models and filter types may entail unique attachment methods. Therefore, it is essential to always refer to the model’s instructions to guarantee proper installation. Securing the right fit and alignment is what the wearer must ultimately achieve.

Perform a fit and seal check
New cartridges & filters have been attached, but the work to ensure total safety does not end there. Employees must perform seal checks. Place your palms over the cartridge and inhale gently. If air leaks between your face and the respirator’s face seal, reposition and adjust the straps until you achieve a more secure fit and seal. Another method is to place your hands over the valve cover and exhale gently. If the air leaks, reposition and fine-tune the straps as well.

Packaging and Shipping

Packaging Way	Carton packaging or customized according to demand
Shipping Way	We will help you to choose the best shipping way according to your detail requirements. By sea, by air, or by express, etc.

Our Certifications

productcate-1-1

FAQ

Q: What are the three types of filters for respirators?

A: There are various filter types: particle, gas (e.g. ABEK) or combination filters. Depending on where you will be using them, you can protect yourself against multiple hazardous substances all at the same time.

Q: What are P1, P2, and P3 filters?

A: Both P2 and P3 filters can be used against harmful particles, aerosols and other agents. The higher the number, the higher the protection given, therefore P3 masks may be used against more harmful substances and at higher concentrations than both P2 and P1 masks.

Q: How often should you change P3 filters?

A: In general, users of respiratory filters replace their filters after 40 hours of use. You can replace your respiratory filters when you feel uncomfortable and tough to breathe through them.

Q: Can you clean respirator filters?

A: Following the manufacturer's instructions, wash reusable respirator face pieces. The face pieces should be cleaned with disinfecting soap, thoroughly rinsed and dried. Dispose of cartridges and prefilters when you smell or taste contaminants, or if your eyes, nose, or throat become irritated (they cannot be cleaned).

Q: How do I know if my filter is not working properly?

A: Respirator filters are made of materials designed to trap particulate as you breathe. Respirator cartridges contain material that absorbs gases and vapours.

We're professional filters and cartridges suppliers in China, specialized in providing high quality customized products. We warmly welcome you to buy or wholesale high-grade filters and cartridges for sale here from our factory. For price consultation, contact us.

6006 Multi Gas Cartridge, 6003 Cartridge, EN14387 Type A Cartridge